Freedom in all dimensions.
Flexible tile is made of the natural marble chips from Italy and an acrylic resin.
The acrylic dispersions are ecologically safe for the health.
Tile’s thickness is less than a quota of inch (0,16 in)
The scope of flexible tile is quite extensive: the facades, pedestals, fences, interior walls, kitchens, bathrooms, fireplaces, columns, and many other surfaces.
The manufacturing plant warrants 30 years of service life. But pay attention, the service life of the material depends on properly prepared surface (base) and correct installation process.
The required minimum for applying the flexible stone includes glue, knife, scissors, and brush.
Using the grout is not necessary. This function is performed by glue. To make the seams in color, just add a colored pigment glue (use glue and pigment one brand!).
The sheets are apply with the back of the material, the protective paper should be on the face side.
Yes, flexible tiles can be laid on the interior and exterior angles of 90 degrees, as well as on the column by warming them up with the dryer.
We recommend using the adhesives for laying stone and ceramic tiles — Flexibility adhesive with high adhesion and good resistance to frost.
Pay attention if your façade is revetted, then you need to choose an adhesives with frost resistance of not less than 50 cycles.
An adhesive consumption is 5.51 lb. / 10.76 sqft
Use grout is not necessary. This function is performed by glue. To make the seams in color, just add a colored pigment glue (use glue and pigment one brand!).
While the installation, the adhesive is squeezed in between the seams of the space and then should grate with a brush soaked with water.
Flexible tile cut with scissors and papering knife.
No, tile does not lose its color, as it consists of natural marble chips. The colors are inherent.
No, the flexible tile does not required to cover by protective layer. Material already includes a protective coating layer.
No, you cannot glue tile on wallpaper. The surface of the walls should be strong, and free from layers of old surfaces.
Flexible stone «Delap»
|An example of using fleixbile stone/flexible brick calculation for Single house is 2000 sq ft.|
|FLEXBLE STONE VENEER||NATURAL STONE VENEER|
|Wall Weight (lb/sq. ft.)||Saving||1 lb/sq. ft*2000=2000 lb|
|Thikness||0,16 in||4 in|
|Glue consumption||Saving||1100 lb||2200 lb|
|Bag 80 lb||14 bag||14 bag||28 bag|
|Saving||None, glue serve as grout||1100 lb/sq.ft|
|Bag 80 lb||14 bag||0||14 bag|
|CUT||2 items Equipment||Scissors||Equipment. Stone cutter|
|Time for installation||40 hours||53 sq.ft/per hour||26 sq.ft/per hour|
|Shipping /Packing||2 shipping||2152 sq.ft /1 pallet||500 sq.ft/1 pallet|
|1 pallet/small truck||4 pallet /big truck|
|Accessories||Not, elastic.||Corner element, screw|
|Recommended Building Types||Commercial and institutional buildings
High-traffic areas of multifamily residential structures
High-end single family homes
Buildings requiring a high fire rating
|Protective paper||The stone can be glued on Stone Veneer Mortar (Space Mix «PMSVM», Pro Masonry Mortar Mix, Sakrete Stone Veneer Mortar, Quick Mortar Mix).|
|Backup||concrete, masonry, wallboard, plywood, drywall, concrete block + METAL||concrete, masonry, wallboard, plywood, drywall, concrete block|
|Summary||2 times lighter than natural stone veneer/brick|
|2 times thinner than natural stone veneer/brick. Thickness stone 4 mm|
|2 times cheaper shipping. Because one pallet we can put 2200 sq.ft|
|2 times faster installation. Because don need using Equipment and accessories https://www.youtube.com/watch?v=bnyKBj6DkQg|
|Low consumption of supporting materials*2 times|
|Special protective paper on the face of stone. Protect stone during the grouting|
|You can save money with our stone:
|• Color fastness
• Frost- resistant
• UV resistant
• Easy to clean